Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateFast, Reliable Window Installation Across Kennedale
Window installation in Kennedale, TX most often means replacing those original 1980s bronze-aluminum frames on a brick-veneer ranch before a hailstorm does it for you. A standard double-hung replacement here runs $600 – $1,150 per opening installed, and a bay window conversion typically lands between $2,400 and $4,800 depending on the bump-out framing and brick flashing involved. If you’re calling because seal failure has fogged the glass or a storm cracked a pane on Falcon Way, our crews can reach most Kennedale homes the same day from our Dallas-Fort Worth dispatch office. Call (682) 900-6694 and a live person answers, any hour, not a recording.
Why Lightwell Windows Fort Worth Is Kennedale’s Preferred Window Installation Company
Keith Yamada leads our Window Installation team, and he built the crew’s operating rule around the Cedarwell Care Promise the network has run on since 2010: write the price down before any work starts, and leave the house cleaner than we found it. Kennedale homeowners tell us that matters because they have been through the other kind of crew before, the one that moved the couch without asking and handed over a bigger number at the end than the one they agreed to at the start. That does not happen on a Lightwell job.
Every technician who steps onto your property is background-checked and uniformed, so you know who is at the door before you open it. They follow the C.A.R.E. values on every visit: Clean up like it is our own home, Ask before we move or touch anything, Respect the family’s time and quiet hours, Explain the price before the work. On a window install in Kennedale, that means drop cloths under every opening, shoe covers at the door, and pet-safe sealants wherever there is a choice. Before the crew leaves, you get a photo of the clean-up.
We carry eight manufacturer brands, including PGT, ES Windows, and Mr-Glass, so the recommendation fits the house instead of whatever one vendor had in the warehouse. A light well is what brings daylight deep into a building, and that is what a well-installed window should do for your home in Kennedale.
Styles & brands we work with
Bay Window Installation in Kennedale
Bay Window Installation in Kennedale almost always involves a brick-veneer ranch that was built with a flat front elevation and no architectural projection, so adding a bay means framing a bump-out through the existing wall and flashing it correctly against brick. Most conversions here run $2,400 – $4,800 for a three-lite bay with operating flankers and a fixed center picture unit, including framing, insulation, drywall return, and exterior brick-to-frame flashing. The job takes two to three days on most single-story homes.
Framing and Structural Support
On 1970s-era slabs, the original header above the window opening was sized for a single flat unit, not a projecting bay. A proper Kennedale bay install includes a new engineered header and steel cable support or knee bracing underneath the projection. We pull the permit, and the city inspector checks the header before we close the wall.
Sealing Against North Texas Storms
The bump-out creates four new exterior corners where wind-driven rain will find any gap. We install pan flashing with end dams under the projecting sill and backer rod behind every brick-to-frame transition. That detail matters on Kennedale ranches because the eave overhangs are shallow, sometimes under eight inches, so the top of the bay gets direct rainfall.
Window Contractor in Kennedale
A Window Contractor in Kennedale who understands the local housing stock will tell you the answer is not always the biggest window that fits the opening. On brick-veneer ranches built between 1970 and 1995, enlarging an opening means cutting into brick, and that changes the flashing strategy and sometimes triggers additional structural review. Replacing an existing window in the same rough opening here runs $600 – $1,150 per unit depending on glass package and frame material. Enlarging an opening typically adds $500 – $900 per window for brick cutting, header work, and re-flashing.
Brick Veneer Flashing Details
The key detail on a Kennedale retrofit is the sill pan and the backer rod. Without a pan flashing with end dams, water that gets past the exterior face wicks straight into the wood buck behind the brick. We cut back the brick sill where needed and install a custom pan before the new unit goes in.
Working Around the Family
Window installation is loud at the demolition stage, but it does not have to disrupt a whole week. We schedule the cutting and removal to avoid nap time when you tell us the kids’ schedule, and we keep a HEPA vacuum running inside while the old frames come out. Pets stay safe because we seal off the work area and ask before we open any door or gate.
Trusted Brands We Service in Kennedale
Because we are an independent Cedarwell location, we stock gaskets, balances, and hardware kits locally for the brands we carry, and that means a broken latch on a CWS casement or an ES Windows glazing bead does not mean waiting two weeks for a part. Kennedale homeowners most often choose PGT WinGuard units for impact-rated storm protection, but we also install CWS, ES Windows, ECO Window Systems, and Mr-Glass lines where they fit the budget and the opening. Your windows get serviced by a local team that carries the parts, not a showroom that calls someone else.
See the difference
Before
After
Before
AfterCommon Window Installation Problems We See in Kennedale Homes
- Fogged 1980s aluminum frames. The original bronze-aluminum windows along Falcon Way and Mansfield Cardinal Road used single-pane glass in a non-thermal frame, and the seal between the sash and glass has failed on most of them by now. You can spot them from the street: hazy glass, condensation between panes, and visible silver where the anodizing has worn off.
- Rotting wood bucks behind brick veneer. When a cheap install skips the pan flashing, water wicks behind the frame and rots the wood buck that anchors the window to the rough opening. By the time water stains appear on the drywall, the buck is usually gone and the repair cost has tripled.
- Design pressure ratings that do not meet code. Kennedale sits in a wind zone that requires design pressure ratings specific to the opening size and exposure. Big-box replacement windows often carry a sticker with a DP rating below what the city’s wind-load table calls for on an exposed gable, and the inspector catches it after the window is already in.
- Unpermitted fenestration changes. Skipping the permit and inspection on window replacement can void a wind mitigation credit on your insurance policy and create a title problem when you sell. The city requires the inspection, and a good contractor pulls the permit before the first piece of trim comes off.
Pricing for Window Installation in Kennedale, TX
Here are the numbers we quote on Kennedale homes, written before any work starts and fixed in the contract. A standard double-hung replacement with low-E insulated glass runs $600 – $1,150 per opening installed. Casement and awning units add 15 – 25% because of the hardware. Picture windows start around $500 installed and go up with size and impact glass. Bay and bow conversions land at $2,400 – $4,800 as noted above. A full house of twelve windows on a 1980s ranch typically runs $7,500 – $13,000 depending on the mix of sizes and whether you choose impact-rated laminated glass. The written quote lists every line item, and the 365-Day Done Right Promise means that if the finished work is not right, we make it right. Call (682) 900-6694 to schedule your free estimate.
We Also Serve Cities Near Kennedale
Our crews work throughout southeast Tarrant County and the surrounding area, including Window Installation in Kennedale and nearby Burleson, Fort Worth, Haltom City, and Hurst. If you live just over the city line, the same written-price policy and the same C.A.R.E. values apply on every job.
Serving Kennedale, TX - Our Local Coverage Area
We’re based in the Kennedale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Installation in Kennedale
The required design pressure rating depends on the window’s size, height, and exposure, but most Kennedale openings fall into the DP 40 to DP 50 range, with exposed gable ends and large fixed glass sometimes requiring DP 60 or higher. A compliant quote lists the DP rating for every opening on the proposal, not just a frame brand. Call (682) 900-6694 and we will check your specific openings against the city’s wind-load table, free.
Yes, Kennedale requires a permit and inspection for window replacement when the frame or rough opening changes, and most retrofits on brick veneer fall under that rule. We pull the permit as part of the job, and the inspector checks the flashing and header before the wall is closed. Skipping the permit can void wind mitigation credits and create a lien problem at resale.
Not automatically, and not on every carrier. Impact-rated windows with documented DP ratings and a passed inspection can qualify for wind mitigation credits on many Texas policies, which sometimes reduces the windstorm portion of the premium, but the amount depends on your carrier and policy terms. We provide the documentation your insurance company needs: the DP rating, the product approval number, and the city inspection record. Call (682) 900-6694 and we’ll walk you through what to ask your agent.
Those windows were built with a thin glazing bead and single-pane glass that relies on a rubber seal, and thirty to forty years of North Texas temperature swings have hardened and cracked that seal on most units. You can replace the glass pack on some double-hung frames, but if the frame itself is bowed or the balance system is worn, repair costs approach half of a replacement and the energy gain is limited. We will give you an honest breakdown of repair versus replace, and the estimate is free.
Ask the contractor to put three things on the written proposal: the design pressure rating for each opening, the product approval or FL number for the window model, and confirmation that the permit and inspection are included. If the quote does not list those, it is probably a generic price sheet, not a wind-code-compliant install. Every Lightwell quote in Kennedale includes those line items because the wind-load paperwork is part of the job, not an add-on.
Ready to get a written price for window installation in Kennedale? Call (682) 900-6694 and speak with a live person 24/7. We’ll schedule a free on-site estimate, measure your openings, and hand you a fixed quote with every line item before you commit to anything.
Written by Keith Yamada, Owner at Lightwell Windows Fort Worth, serving Kennedale and southeast Tarrant County since 2010.
Six Reasons Homeowners Choose Lightwell Windows Fort Worth
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.