Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateStyles & brands we work with










See the difference
Before
After
Before
AfterAwning & Hopper Windows in Fort Worth, TX
Awning windows hinge at the top and open outward from the bottom, while hopper windows hinge at the bottom and tilt inward from the top. Both styles work exceptionally well in Fort Worth’s climate because they seal tightly against summer heat and can stay open during light rain without letting water inside. Replacing old awning or hopper windows in Fort Worth typically costs between $650 and $1,400 per opening including installation, depending on size, frame material, and glass package. Lightwell Windows Fort Worth carries awning and hopper options from CGI, CWS, and ES Windows, and every job includes a written price before any work starts. Call (682) 900-6694 to talk through your openings with a real person.
For the full scope of what goes into a window replacement project, see our Window Installation page. We walk through framing, glass selection, and what to expect during a Fort Worth install.
When You Need Awning & Hopper Windows
Bay & Bow Windows and other styles aren’t the default in most Fort Worth homes. But specific rooms and situations make them the clearest choice. Here’s what we see on service calls across Tarrant County:
- Basement and crawl-space windows. Hopper windows are the standard for below-grade openings. If your older hopper is rusted, fogged, or won’t latch, you’re losing air and inviting pests. Fort Worth’s clay-heavy soil shifts, and that movement can warp old basement frames.
- Bathrooms and utility rooms. Awning windows give you ventilation without giving up privacy. You can leave an awning cracked open during a July afternoon shower and not worry about water pooling on the sill.
- Hard-to-reach spots above counters or appliances. A crank-operated awning window above a kitchen sink or laundry area beats a sliding window you have to lean across a counter to reach.
- Rooms that catch strong west sun. In neighborhoods like Ridglea Hills or Wedgwood, afternoon heat loads are real. Awning windows pair well with low-E glass to cut that heat without blocking the light.
- Older steel-frame or jalousie windows that don’t seal. Fort Worth homes built in the 1960s and 70s often have jalousie or awning-style windows with failing gaskets. You can feel the draft standing next to them in January.
- Adding ventilation to a room with fixed glass. If a sunroom or breakfast nook has fixed picture windows, a matching awning unit below or beside it adds airflow without changing the look much.
If any of these sound like your house, a replacement usually runs between $650 and $1,400 per window. The exact number depends on the size and what we find when we open the wall. You’ll have that number in writing before we touch anything.
Our Awning & Hopper Windows Process
We replaced enough windows in Fort Worth to know that the installation is where quality either holds up or falls apart. Here’s how a typical job goes:
- Measure and inspect. We check every opening for square, look at the existing frame, and note any water damage or rot. Fort Worth’s humidity swings mean we look carefully for hidden moisture around old window sills.
- Written estimate. We put the full price in writing, including the window, frame work, trim, and cleanup. No allowances, no “we’ll see when we get in there” surprises. This is the no-hassle upfront pricing we run every job on.
- Glass and frame selection. We walk you through options from CGI, CWS, and ES Windows. If you need impact-rated glass for storm season, CGI has strong options. If energy efficiency is the priority, we’ll talk low-E coatings and argon fills specific to Fort Worth’s climate zone.
- Installation day. Our background-checked, uniformed technicians arrive on schedule. They lay down drop cloths in the work path, use shoe covers at the door, and follow the C.A.R.E. values: Clean up, Ask before moving anything, Respect your time and quiet hours, Explain the price before the work.
- Cleanup and walk-through. We remove the old windows, sweep and vacuum the work areas, and take a photo of the cleanup before we leave. Then we walk you through the install, show you how the hardware operates, and answer any questions.
Every window replacement is covered by our 365-Day Done Right Promise. If the finished work isn’t right, we make it right. No debate, no countdown.
Awning & Hopper Windows Pricing in Fort Worth
Most awning and hopper window replacements in Fort Worth run between $650 and $1,400 per opening. Here’s how that typically breaks down:
| Job Component | Typical Range |
|---|---|
| Standard vinyl awning window (24×36, installed) | $650 – $900 |
| Standard hopper window (basement size, installed) | $600 – $850 |
| Larger or custom-size awning window | $900 – $1,400 |
| Aluminum-frame or impact-rated upcharge | $150 – $400 per window |
| Rotted frame or sill repair | $100 – $350 per opening |
| Whole-room retrofit (3-4 windows, including trim and cleanup) | $2,800 – $5,500 |
What moves the number: window size, whether the existing frame needs repair, and the glass package you choose. A low-E, argon-filled double pane costs more up front and pays back in lower July electricity bills. Fort Worth homes run air conditioning from May through September and often into October, so glass upgrades usually pencil out.
We never charge for an estimate. Call (682) 900-6694 and we’ll schedule a measurement visit, send you a written price, and you can think it over without any pressure.
How Awning and Hopper Windows Handle Fort Worth Weather
Fort Worth gets about 36 inches of rain a year, and a good chunk of it falls in spring and fall downpours that come on fast. Casement Windows and awnings are among the few styles you can leave open during a light rain. The sash angles outward and acts like a small awning roof over the opening, so water runs off the sill instead of into the house. That’s the design working as intended.
Hoppers are the basement workhorse. They open inward at the top, which keeps rain out while letting stale air escape. In an older Fort Worth home where the foundation has settled and the window wells sit low, a well-sealed hopper makes a real difference in how the basement smells and feels.
The heat is the bigger issue. Fort Worth routinely hits 100 degrees in August. Awning and hopper windows seal on all four sides when closed, which means fewer leak points than sliders or double-hungs. Paired with a good low-E coating, they hold the air conditioning where it belongs.
What We Carry: CGI, CWS, and ES Windows
Lightwell Windows Fort Worth carries eight manufacturer brands. For awning and hopper windows, three are particularly relevant:
- CGI makes impact-rated windows built for storm country. If your home is in a wind-borne debris zone or you simply want the strongest seal available, CGI awning windows are worth a look. They’re heavy, well-built units that hold up to Fort Worth’s spring hail and high winds.
- CWS offers a strong mid-range vinyl and aluminum lineup. Their awning windows are tight-sealing and come in a wide range of custom sizes, which matters when you’re matching an unusual opening in an older home.
- ES Windows specializes in thermally broken aluminum frames. If you have large awning windows or want narrow sightlines with good energy performance, ES Windows provides a cleaner look without sacrificing insulation.
The recommendation always fits the home, not the installer’s preferred vendor. A light well is what brings daylight deep into a building, and that’s what a well-installed window should do for your home. We’ll match the right window to the opening, the exposure, and your budget.
What Installation Day Looks Like, Specifically
You may have had a crew before that left dust in the window tracks and a pile of old caulk on the porch. We hear that a lot. So here’s what our crews do, named plainly:
- Shoe covers at the door. Every technician on every visit. The floors you walk on don’t become part of the job site.
- Drop cloths along the work path. From the entry door to each window opening, we lay protection down first.
- Pet-safe caulk and sealants where an alternative exists. We check before we start. If your dog or cat has a habit of investigating every new smell, we’ll tell you what products we’re using and where they can roam safely until things cure.
- Quiet tools during nap time. We ask about your household schedule. If a child is napping or a baby is down, we plan cutting and hammering around it as much as the job allows.
- Ask before moving anything. That includes furniture, wall hangings, and anything on the windowsill. The C.A.R.E. values are not a poster in the office. They’re instructions for the crew.
- A photo of the cleanup before we leave. We take a picture of the cleaned work area and send it to you. That’s our standard. You’ll see what the room looked like when we stepped out.
We can’t promise an install day will be silent. Window replacement involves some cutting, prying, and removal. But we can promise it will be orderly, and that you’ll know the price before it starts and see the cleanup before we leave.
Common Fort Worth Neighborhouses We Work On
Awning and hopper windows show up in all kinds of Fort Worth homes, but we see them most often in a few specific situations.
Mid-century ranches in Wedgwood and Westcliff still have their original steel-frame awning windows. Those frames conduct heat and rust over time. The glass seals fail and the windows fog. Replacing them with modern vinyl or thermally broken aluminum units changes the afternoon temperature in those rooms immediately.
Brick bungalows in Fairmount and Ryan Place often have basement hoppers that haven’t been touched since the house was built. The hardware is painted over. The screens are gone. We’ve pulled hoppers from those basements that were essentially decorative by the time we got there.
Newer builds in North Fort Worth and Heritage occasionally spec awning windows in bathrooms and kitchens. Those units tend to be fine structurally but sometimes lack the glass package for our summers. Homeowners notice the heat radiating through the glass in August and call us to upgrade the panes while keeping the frames that match the house.
Awning vs. Hopper: Which One Fits Which Room
The choice is usually dictated by the opening, not by preference. But when both are possible, here’s the honest guidance:
Awning windows work best above eye level or above furniture. Because they crank outward and upward, they need clearance on the exterior. They’re excellent in kitchens, bathrooms, and anywhere you want rain-safe ventilation with a clean sill line inside-though Garden Windows can also work well for plant-filled kitchen spaces.
Hopper windows work best at or below eye level. They open inward, so they need interior clearance. They’re the standard for basements and crawl spaces, but we also install them in bathrooms and storage rooms where wall thickness or exterior obstacles prevent an awning from opening outward.
If you can’t decide and both will physically work, an awning usually offers the better weather seal and easier operation. A hopper in a basement window well is the correct choice for air movement and moisture control. We’ll tell you what we’d put in our own house and why.
Energy Efficiency and Glass Choices
Fort Worth sits in a cooling-dominant climate. That means the single most effective glass upgrade is a low-E coating that blocks solar heat gain while letting visible light through. Argon or krypton gas between the panes adds an insulating layer that matters most in winter, but it also helps in summer by slowing heat transfer.
For awning windows that face west or south, we recommend a lower solar heat gain coefficient. For hoppers in a shaded basement, a less aggressive glass package saves money and lets in more light. The right answer depends on the exposure, and we’ll show you the numbers for each option on the written estimate.
Impact-rated glass from CGI adds cost but delivers storm protection. If your Fort Worth home is in an older neighborhood with large trees nearby, hail and limb strikes are a practical concern. That glass is rated for it.
What to Check on Your Current Awning or Hopper Windows
If you’re not sure whether replacement is necessary, start with a quick look at what’s there:
- Does the crank or hinge move smoothly? Stiff hardware often means the frame is warped or rusted. Forcing it further can snap the mechanism.
- Is there condensation between the panes? Failed seals let moisture in. You can’t clean it off. The glass unit needs replacing.
- Can you feel a draft with the window closed and locked? Run your hand around the edges on a windy day. Any air movement means the weatherstripping or frame is compromised.
- Is the sill soft, stained, or peeling? Water intrusion at the sill is the first sign of a rot problem in wood-frame homes. Fort Worth’s heavy spring rains reveal this fast.
- Are there rust streaks on metal frames? Older steel awning windows in Fort Worth ranches eventually rust through. Once the frame rusts, the window’s structural integrity is gone.
If any of these are present, we recommend a measurement visit and a written quote before the issue worsens. Call (682) 900-6694 and schedule us to take a look. The visit and the estimate cost you nothing.
FAQs – Awning & Hopper Windows
Can you leave awning windows open in the rain?
Yes, during light to moderate rain, an awning window can stay open without water getting inside because the outward-angled sash acts as a shelter over the opening. During a heavy Fort Worth storm with driving wind, close and lock them like you would any window. The design resists rain, but it is not a guarantee against a sideways downpour.
How much does it cost to replace a hopper window in Fort Worth?
A standard basement hopper window replacement in Fort Worth typically costs between $600 and $850 per opening including installation, with larger custom hoppers running up to $1,200. The final number depends on the window size, whether the frame needs repair, and the glass package you choose. Call (682) 900-6694 for an exact quote – estimates are free and in writing.
Are awning windows more expensive than double-hung windows?
Awning windows typically cost 10 to 20 percent more than an equivalent-size double-hung because the hinge hardware and multi-point locking system add cost. However, they often seal better than double-hungs and require less maintenance over time. Whether the extra cost is worth it depends on the room and how you use the window.
Can you replace just one awning window, or do you need to do the whole room?
You can absolutely replace a single awning or hopper window. We do it often, matching the new unit to the existing windows as closely as the available product lines allow. If the other windows in the room are near end of life, replacing them together saves on labor per opening, but we’ll never push a full-room replacement if one window solves the problem.
How long does awning and hopper window installation take?
Most single-window replacements take one to three hours once the crew starts, including removal, framing adjustments, sealing, and interior trim work. Full-room projects of three to four windows are usually done in a single day. A whole-house window replacement can take two to four days depending on the number of openings.
Do hopper windows work in Fort Worth basements that get damp?
Hopper windows are the right choice for basement ventilation, but they do not solve an active water intrusion problem. If your Fort Worth basement has standing water or a wet floor after rain, that’s a drainage or foundation issue that needs attention from a waterproofing specialist before you replace the windows. We check for sill rot and frame damage as part of the estimate and tell you what we find.
Why Fort Worth Homeowners Call Lightwell Windows Fort Worth
Lightwell Windows Fort Worth is part of the Cedarwell network, operating to the Cedarwell Care Promise since 2010. That means a curated lineup of eight manufacturer brands, a written price before any work starts, and a 365-Day Done Right Promise stamped on every job. A live person answers the phone 24/7. If you call at midnight with a question about a new install, you’ll get a person, not a recording.
We’re independently owned and operated. The crew that shows up at your door works for this location, not some distant office. Keith Yamada and the team live and work here. That changes how we approach every job.
Get a Free Awning & Hopper Window Estimate
The best way to know what your awning or hopper window replacement will cost is to let us measure and look. We’ll schedule a visit at a time that works for your household, inspect the existing windows, and send you a written price that covers everything: the window, the labor, the trim, the cleanup. No surprises at the end.
Call (682) 900-6694 to schedule your free estimate. A real person answers, day or night. We’ll bring shoe covers, a tape measure, and honest answers about what your Fort Worth home needs.
Written by Keith Yamada, Owner at Lightwell Windows Fort Worth, serving Fort Worth.
Six Reasons Homeowners Choose Lightwell Windows Fort Worth
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.