Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateCGI Window Installation: The Fort Worth Owner’s Guide
CGI window installation in Fort Worth typically runs between $180 and $400 per opening for labor when we’re working with an existing CGI frame, and most jobs are completed the same day we arrive. If the entire CGI window unit needs replacement rather than a part swap, you’re looking at $900 to $2,600 per window depending on the series and glass package. Most Fort Worth homeowners discover a problem the hard way: a window that suddenly won’t close flush against an August heat wave, or a latch that lets a cold January draft whistle through the gap between the sash and the frame.
We stock common CGI window installation components on our trucks and can source series-specific parts within a few business days for older or less common units. When a homeowner calls us about a CGI window that’s not seating properly, the issue is rarely the glass. It’s a roller that’s worn flat, a balance that’s lost tension, a latch that’s been yanked one too many times, or weatherstripping that the Texas sun has baked into something brittle and useless.
Which CGI Models This Applies To
CGI makes impact-rated windows in several series, and each one has its own installation and hardware requirements. The most common lines we work on in Fort Worth are the Estate Collection, Targa, and the classic Sentinel series. Estate Collection windows use a heavier frame profile designed for larger openings, and their balances and rollers are not interchangeable with Targa hardware. That’s the first thing we check when someone hands us a part they ordered online that doesn’t quite fit.
Every CGI window carries a label, usually on the top or side rail of the sash or on the edge of the master frame. That label will tell you the series, the size, and the impact rating, which is what we need to match hardware correctly. The easiest way to get an accurate match is to take a clear photo of that label and text it to us before we come out. We’ll tell you what we think before we ever ring the doorbell. OEM CGI parts are built to the exact tolerances of the original window, and for anything involving the locking mechanisms or the glazing beads, we prefer OEM. For rollers and weatherstripping, there are solid aftermarket options that perform just as well at a lower cost, and we’ll tell you plainly which one makes sense for your window and your budget.
One thing worth knowing: CGI’s impact-rated windows are not one-size-fits-all on the install side either. The mounting fins and anchor requirements differ between wood-frame and concrete-block openings, which matters in Fort Worth’s older neighborhoods where construction methods vary block by block.
Styles & brands we work with
Signs Your CGI Window Installation Is Failing
- The sash won’t stay up or is hard to lift. This usually points to a balance system that’s lost tension or a roller that’s worn flat on one side. On CGI windows, the balance is specific to the sash weight, so a generic replacement won’t work properly.
- You can feel air moving around the closed window. Weatherstripping on the sill and side channels compresses over time, especially with Fort Worth’s heat. Once the seal goes flat, the window loses its tight fit and your AC bill notices before you do.
- Water marks on the interior sill after rain. This is usually the weep system clogged or a failed corner seal where the frame meets the sill. On impact windows, water intrusion at the corner can look small while the underlying seal is doing quiet damage to the wall cavity.
- The latch or lock drags or won’t engage. CGI hardware is machined to tight tolerances, and when the lock starts to feel rough, it’s often because the sash has settled slightly or the keeper needs a shim. Forcing it strips the teeth and turns a $40 hardware replacement into a $200 repair.
- The window is visibly out of square in the opening. If the gap between the sash and frame is wider at one corner than the other, that’s an installation issue, not just wear. Fort Worth’s clay soils shift, and frames that were installed without proper shim support eventually telegraph that movement through the window.
Replacement Cost & What’s Included
In Fort Worth, you should expect to pay between $180 and $400 per window for labor-only CGI window installation when we’re working with an existing frame, and the part cost sits on top of that. A set of replacement rollers runs $25 to $60 per window, balances run $40 to $90 per sash, and a complete latch assembly runs $30 to $80. A full CGI window replacement, including the new unit, runs $900 to $2,600 per opening, with the spread driven by series, size, and whether it’s a standard impact window or one built for Fort Worth’s hurricane wind zone ratings.
Every job gets a written price before any work starts. You’ll know the part cost, the labor, and the total, with no change orders at the end. If something inside the wall looks wrong once we get the window out, we’ll show you, explain it, and give you a separate written price before we do anything else. Our work on the install is covered by the 365-Day Done Right Promise: if it’s not right, we make it right.
See the difference
Before
After
Before
AfterDIY or Call Us?
There are two things a homeowner can safely check before calling us. First, clean the track. Fort Worth dust plus hard water from sprinklers leaves a film that wears rollers down fast, and sometimes that’s all it is. Second, look at the label on the sash rail so you can tell us the series and size when you call. That saves a trip.
What we don’t recommend is pulling a CGI sash out of the frame without knowing how the balance system releases. These are heavy impact-rated sashes, and the balance mechanisms are under tension in a way that can deliver a serious pinch or a broken finger if you release it wrong. Window rollers and latches are one thing, but if you’re dealing with a balance or a full frame reset, call us before you force anything. Keith and our crew would rather spend twenty minutes on the phone talking you through what we’re seeing in a photo than spend an afternoon repairing a DIY attempt that went sideways. Call (682) 900-6694 and we’ll talk it through.
FAQs
Rollers and weatherstripping typically last 8 to 12 years in Fort Worth before the combination of summer heat and dust takes a real toll. Hard working parts like locks and balances usually last 15 to 20 years, assuming the window was installed square to begin with. If you’ve got a CGI window that’s gone through more than a decade of Texas summers, call (682) 900-6694 and we’ll tell you whether you’re looking at a part swap or a full replacement.
In most cases yes, the part can be replaced without touching the frame or the glass. A failing roller or balance is a hardware issue, not a window issue. The exception is when the frame itself has shifted out of square or the corner seals have failed, which means we’ll sit down with you and go over the honest math: repair now, or replace once. Call (682) 900-6694 if you want an exact read on your situation.
A part swap like rollers, a balance, or a latch takes under an hour per window in most Fort Worth homes. A full CGI window replacement takes half a day to a full day depending on how many windows and how the frames were originally set. We’ll give you a straight time estimate with your written price before anything starts.
We stock common CGI rollers, latches, and weatherstripping on our trucks, and special-order hardware usually arrives within three to five business days. We are an independent Fort Worth installer, not a CGI corporate operation, which means we stock what our local customers actually need, not what a corporate catalog says should sell. Call (682) 900-6694 and we’ll check the truck before we even schedule the visit.
Call Lightwell Windows Fort Worth for CGI Window Installation
If you have a CGI window that’s fighting you, dragging, leaking air, or refusing to lock, call us at (682) 900-6694 for a free estimate. We’ll get the details from you, check what’s on the truck, and give you a written price before anything gets touched. A window should bring in light without letting in doubt about how well it was installed. That’s the whole job, and we take it seriously.
Written by Keith Yamada, Owner, Lightwell Windows Fort Worth at Lightwell Windows Fort Worth, serving Fort Worth and nearby areas.
Six Reasons Homeowners Choose Lightwell Windows Fort Worth
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.