Impact garage doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimatePGT Impact Garage Doors: The Fort Worth Owner’s Guide
PGT impact garage doors in Fort Worth typically run between $4,800 and $9,500 installed, depending on door width, track hardware, and whether your existing opener can stay. We stock PGT-compatible impact-rated doors and hardware, and most replacements are installed within three to five business days after we confirm measurements. Most owners discover they need this work after a spring breaks, a panel delaminates, or a post-storm inspection reveals hairline cracks along the bottom rail that compromise the impact rating.
This page covers what we see in Fort Worth garages every week: which PGT series you likely have, what fails first in North Texas heat and hail, what a replacement actually costs, and what your options are when a door has lost its structural rating.
Key Takeaways
- Installed PGT impact garage doors in Fort Worth run $4,800 to $9,500 depending on size, hardware, and opener compatibility.
- PGT impact doors are designed for Florida and Gulf Coast wind zones, and Fort Worth’s hail and extreme heat create different failure points than coastal salt air does.
- Spring replacement on a PGT door is dangerous and requires training. We recommend leaving spring work to a professional every time.
- We stock PGT-compatible springs, rollers, cables, and bottom seals on our trucks for most Fort Worth service calls.
- Lightwell Windows Fort Worth is an independent provider, not affiliated with PGT. We install and service their products alongside six other brands.
Styles & brands we work with
Which PGT Models This Applies To
If your Fort Worth home has a PGT impact garage door, it is most likely from the WinGuard or Estate series. WinGuard is PGT’s aluminum-framed impact line built for high-wind coastal markets, while Estate Collection doors use a heavier aluminum extrusion and can accept glass or solid infill panels. Both share hardware specifications, but track diameter and spring sizing differ based on the door’s full weight, which changes with glass density and panel thickness.
The quickest way to identify your door: look for the PGT etched label on the interior side of the bottom right panel, near the hinge. That label lists the series, the Miami-Dade County product approval number, and the manufacture date. If the label is missing, measure the door thickness. Most Fort Worth installs of PGT impact garage doors run 1-3/4 to 2 inches thick, versus standard non-impact doors at 1-3/8 inches. That extra thickness matters because it changes which rollers, hinges, and bottom seals fit correctly.
For replacement parts, we almost always recommend OEM PGT hardware for anything structural: hinges, tracks, springs, and cables. Aftermarket equivalents are available, but PGT’s hardware is spec’d to the exact panel weight, and mixing in a generic spring changes the lift balance in ways that wear out openers early. For cosmetic items like weatherstripping and bottom seals, quality aftermarket parts work fine and cost less, and we stock them to keep your total bill honest.
Signs Your PGT Impact Garage Door Is Failing
- Door feels heavy or doesn’t stay in place when opened halfway. This almost always means a spring has lost tension or broken. PGT doors are heavy, and when the spring fails, the opener bears the full load, which shortens opener life and risks the door dropping suddenly.
- Visible cracks or white stress lines on the panel face, especially near the bottom rail. North Texas hail and temperature swings cause flex stress in aluminum panels. Once a panel shows visible cracking, it is losing impact integrity and should be replaced before the next storm cycle.
- Rollers squeal, bind, or have visible black dust around the track. PGT doors use heavier rollers than standard doors, and when bearings dry out, the heavy panels drag and chatter. Letting this go too long warps the track and eventually pulls hinges out of the panel.
- Bottom seal is flattened, torn, or missing sections. A failed seal looks minor, but on an impact door it affects air and water sealing and can allow water to sit against the bottom panel, accelerating corrosion along the rail, especially in Fort Worth’s clay soil where garage floors shift with moisture changes.
- Opener strains or reverses partway down. If your opener worked fine and now struggles, the most common cause on PGT impact doors is a spring that has stretched past its spec without fully breaking. That distributes the lifting load unevenly and makes the opener fight the door.
See the difference
Before
After
Before
AfterReplacement Cost & What’s Included
Full PGT impact garage door replacement in Fort Worth runs $4,800 to $9,500 installed for a standard double-wide (16-foot) door. The spread depends on whether you are reusing track, the number of glass panels, the spring replacement, and whether your existing opener is rated for the heavier door. A full door with new track, new springs, and fresh weatherstripping lands in the $6,500 – $8,500 range for most Fort Worth homes we serve.
Here is what you can expect on a typical PGT impact garage door install in Fort Worth:
- PGT impact-rated door panel assembly: $2,100 – $4,200 depending on panel type and size.
- New track, hinges, rollers, and springs (if needed): $900 – $1,500.
- Labor, haul-away of old door, and sealing: $1,200 – $1,800.
- Bottom seal and weatherstripping: $250 – $450.
Every price is written before work starts, and every job is covered by our 365-Day Done Right Promise. If the finished work is not right, Lightwell makes it right. No debate, no countdown.
DIY or Call Us?
Here is the honest version. You can safely check your PGT door yourself: inspect the panels for cracks, look at the bottom seal, listen to the rollers. That is good homeowner maintenance.
What you should not touch yourself: springs, cables, and anything under tension. PGT springs are wound under enough force to cause serious injury or death if released incorrectly. We have seen garage door spring accidents that ended in surgery. We train our crew to handle these safely every single day, and even we treat every spring with respect. Same goes for adjusting track anchors on an impact door: the door weight makes a mistake irreversible fast.
If your PGT door is sagging, groaning, or refusing to stay open, call us at (682) 900-6694. We will send someone who does this work daily, with the right tools and the right parts on the truck, and a written price before anything is touched.
FAQs
In Fort Worth’s climate, a well-maintained PGT impact garage door typically lasts 18 to 25 years on the panels and track, but springs and rollers generally need replacement every 7 to 10 years, sometimes sooner with frequent cycling or heavier glass panels. We check spring tension and roller condition on every service call so you know what is coming before it fails.
Yes, in plenty of cases. A cracked panel can be swapped, a worn roller can be replaced, a sagging spring can be reset if caught early, and a bottom seal can be renewed for a fraction of a full door cost. Replacement makes sense when multiple panels show stress, the track is warped, or the door no longer meets the original impact rating.
Most single-door replacements take four to six hours on-site. We photograph the cleanup before the crew leaves, and we leave your garage floor cleaner than we found it. You will have a working door the same day the install crew arrives.
Our trucks carry common PGT-compatible springs, rollers, cables, and bottom seals for most Fort Worth service calls. For full door replacements or less common panel configurations, we order direct and typically have the door at your home within three to five business days.
We also stock and service impact garage door parts for CGI, CWS, and ES Windows products, plus residential window and door products from Therma-Tru, ECO Window Systems, Mr-Glass, and ViewLux. We are a full windows-and-doors provider, so we can serve whatever your home needs beyond the garage.
For most residential PGT impact garage door replacements in Fort Worth, a permit is not required if the track and structural attachment points are unchanged. When a permit is needed, we pull it before any work starts and pass inspection before we call the job done. We will tell you during the estimate whether your street needs one, so there is no surprise on the back end.
Call Us for a Free PGT Impact Garage Door Estimate in Fort Worth
Keith Yamada and the Lightwell Windows Fort Worth team have measured and installed frames in houses along the edges of the TCU campus and throughout North Texas. We know Fort Worth garages: the clay soil, the hail seasons, the heat that bakes springs and seals faster than anywhere else in the state. A window should bring in light without letting in doubt about how well it was installed. Same goes for a garage door. Call (682) 900-6694 and we will walk you through what is actually failing, what it costs to fix, and what the finished work will look like. Every price in writing before anything is touched.
Written by Keith Yamada, Owner, Lightwell Windows Fort Worth at Lightwell Windows Fort Worth, serving Fort Worth and nearby areas.
Six Reasons Homeowners Choose Lightwell Windows Fort Worth
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.