Horizontal roller
Single hung
Double hung
Casement
Bay & bow
Sliding glass doors
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
AfterHorizontal Roller Windows in Fort Worth, TX
Horizontal roller windows slide side to side on a track instead of cranking outward or tilting inward. In Fort Worth, they’re a smart fit for wide openings, ranch-style homes, and any spot where you want full ventilation without a window sash sticking out into a walkway or patio. Lightwell Windows Fort Worth installs horizontal roller windows from brands like ES Windows and CGI, and every job includes a written price before work begins. If you’re weighing options, call us at (682) 900-6694 and we’ll talk through what fits your home and your budget. You can also see how this fits into the larger picture on our Window Installation in Fort Worth page.
Horizontal roller windows go by a few names: sliding windows, gliding windows, roller windows. They all work the same way. One sash stays fixed while the other slides along a track, usually on rollers or nylon glides. The track sits in the frame, so there are no hinges to sag and no cranks to strip. For a Fort Worth home with wide window openings, a roller window gives you a bigger pane of glass than single & double hung windows in the same rough opening, which matters when you’re looking at a live oak in the backyard or trying to pull morning light into a breakfast nook.
A picture & fixed windows light well is what brings daylight deep into a building. That is what a well-installed window should do for your home. Horizontal roller windows, with their wide glass and low-profile frame, do this especially well on long walls where several windows sit in a row.
When You Need Horizontal Roller Windows
Most Fort Worth homeowners call us for window installation near me in Fort Worth, TX when they’re replacing an old aluminum slider that’s fighting them, or when they’re building or remodeling and want a clean, modern look. Here are the situations we see most often:
- Wide openings where a crank-out window won’t work. If the opening is wider than it is tall, a horizontal roller is the natural choice. A casement window that wide gets heavy, sags over time, and blocks a walkway when open.
- Windows over a kitchen sink or counter. You don’t want to lean across a counter to crank a window. A roller slides with one hand, from a standing position.
- Old aluminum sliders that stick, leak, or whistle. Many 1970s and 1980s homes in Wedgwood, Ridglea, and the TCU area still have original aluminum sliders. The rollers wear flat, the tracks fill with grit, and the frames conduct heat straight into the house.
- Patio-facing walls and covered porches. A horizontal roller window lets you pass plates or drinks to someone on the porch without a sash swinging into the walkway.
- Texas heat with high cooling bills. In Fort Worth’s July and August, single-pane or failed-seal sliders bleed cool air. Upgrading to a low-E insulated roller window makes a noticeable difference on the west and south walls of your home.
- Bedrooms and nurseries where quiet matters. A quality roller window with good weatherstripping seals tightly, and it doesn’t rattle in the wind the way worn sliders do.
Our Horizontal Roller Windows Process
Every Lightwell job follows the same steps, whether it’s one window or fourteen. The point is that you know what’s happening before it happens, and nothing on the invoice is a surprise.
- Measure and assess. We measure the rough opening, check the existing frame for rot or settlement, and look at how the window sits in the wall. In older Fort Worth neighborhoods like Ryan Place or Fairmount, we pay extra attention to out-of-square openings, which are common in pier-and-beam homes.
- Recommend the right window, not the convenient one. Lightwell carries eight manufacturer brands, including ES Windows and CGI, so the recommendation fits your opening size, exposure, and budget. We’ll tell you when a vinyl roller makes sense and when a thermally broken aluminum frame from ES Windows is worth the step up for a west-facing wall.
- Written price before any work starts. You get a line-item price on paper or by email. It covers the window, the install labor, the trim work, and the haul-away of the old unit. No allowances, no open-ended line items.
- Installation day. Background-checked, uniformed technicians arrive and follow the C.A.R.E. values: Clean up like it’s our own home, Ask before we move or touch anything, Respect your family’s time and quiet hours, and Explain the price before the work. Shoe covers and drop cloths go down before the first tool comes out. If there are kids napping or a dog that gets anxious, tell us and we’ll sequence the work around it.
- Clean-up photo and walkthrough. Before we leave, we take a photo of the cleaned-up work area and walk you through the new window: how it locks, how to remove the sash for cleaning, and what to expect in the first week.
- 365-Day Done Right Promise. If something’s not right within the first year, we make it right. No debate, no countdown to midnight. You call, a live person answers at (682) 900-6694, and we schedule the fix.
Most horizontal roller window replacements take one day for one to three windows, and two to three days for a whole side of a house. We’ll give you a realistic timeline at the estimate.
Horizontal Roller Windows Pricing in Fort Worth
Most horizontal roller window replacements in Fort Worth run between $750 and $1,500 per opening, installed. That range covers a standard-size vinyl roller window from a brand like ECO Window Systems on the lower end, up through a larger thermally broken aluminum unit from ES Windows or CGI on the upper end. Here’s how the pricing typically breaks down:
- Vinyl horizontal roller window, standard size: $750 – $1,100 per opening, installed
- Thermally broken aluminum roller window: $1,100 – $1,500 per opening, installed
- Full-frame replacement (old window removed to the studs): adds $150 – $300 per opening
- Impact-rated roller window (CGI or CWS): $1,400 – $2,200 per opening, installed
- Disposal of old window and trim: included in every Lightwell quote
What actually moves the price? Opening size is the first thing. A 72-inch-wide roller window costs more than a 48-inch. Frame material matters: vinyl costs less than thermally broken aluminum, and impact-rated glass from CGI or CWS costs more than standard insulated low-E. Then there’s the install method. If the existing frame is rotten or out of square, a full-frame replacement is the honest fix, and it costs more than a pocket replacement that fits into the old frame.
North Texas weather is another factor. Fort Worth gets hail, high wind, and long stretches of triple-digit heat. Windows on the west and south faces of your house take the worst of it. Spending more on a window with a strong solar heat gain rating on those faces pays back faster than upgrading a shaded north wall.
Every Lightwell quote is written, line-item, and free. Call us at (682) 900-6694 for an exact price on your openings. You’ll know the number before you decide anything.
Why Fort Worth Homeowners Choose Lightwell for Roller Windows
We’re an independently owned and operated Cedarwell location, part of the Cedarwell network since 2010. That means we operate to the Cedarwell Care Promise on every job, and we’re accountable to you as a neighbor, not a distant office. Keith Yamada runs this location and takes the calls when something needs attention.
What that looks like in practice:
- Eight manufacturer brands on hand. PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. We’re not tied to one vendor’s catalog, so the window fits the home rather than the other way around.
- A picture of the clean-up. Before the crew leaves, you get a photo of the work area, cleaned and ready. Drop cloths and shoe covers are on every visit, not just the formal living room.
- Pet-safe and kid-aware. We use pet-safe caulk and sealants wherever there’s a choice. If your toddler naps at 1 p.m., we’ll tell you which cut to make before nap time and which to save for after.
- A real person answers the phone, 24/7. If a window feels stuck or a lock isn’t seating at 9 p.m., you call and a person picks up. Not a voicemail maze.
- The 365-Day Done Right Promise. If the finished work isn’t right, we make it right. That promise is stamped on every single job, not just the big ones.
Our home page walks through the full Cedarwell Care Promise and what it covers. You can also review the range of what we do on the Window Installation page to see how roller windows compare to other styles.
FAQs – Horizontal Roller Windows
How much does it cost to replace horizontal roller windows in Fort Worth?
Most horizontal roller window replacements in Fort Worth cost between $750 and $1,500 per opening installed, with impact-rated units from CGI running higher, typically $1,400 to $2,200. Opening size, frame material, and whether it’s a full-frame or pocket replacement drive the final price. Call (682) 900-6694 for a free, written, line-item quote on your specific openings.
Are horizontal roller windows good for Texas heat?
Yes, when they’re built with low-E insulated glass and a thermally broken frame, horizontal roller windows handle Fort Worth summers well. The low-E coating reflects solar heat while the insulated glass slows conductive heat gain. A well-sealed roller window also stops the air leakage that makes old aluminum sliders so costly in July and August.
Can you repair a horizontal roller window instead of replacing it?
Sometimes, if the issue is just worn rollers or a dirty track. But if the frame is bent, the seal between panes has failed, or the glass is single-pane, replacement is usually the more honest long-term fix in Fort Worth’s climate. We’ll tell you which route makes sense after looking at the window, and the written quote covers exactly what we’ll do.
How long does horizontal roller window installation take?
Most single-window replacements are done in one day, and a full wall of three to five roller windows takes two to three days. We sequence the work around your family: quiet tools near nap time, pet-safe products throughout, and the work area cleaned with a photo before we leave. Call (682) 900-6694 and we’ll give you a realistic timeline for your specific job.
Do you install impact-resistant horizontal roller windows in Fort Worth?
Yes, we install impact-rated horizontal roller windows from CGI and CWS for Fort Worth homes that want the extra protection during hail season and severe thunderstorms. Impact windows also reduce outside noise, which Fort Worth homeowners near I-30, I-35W, or the rail lines notice right away. Pricing typically runs $1,400 to $2,200 per opening installed, and a free estimate will give you the exact figure.
Written by Keith Yamada, Owner at Lightwell Windows Fort Worth, serving Fort Worth.
Six Reasons Homeowners Choose Lightwell Windows Fort Worth
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.