Door Installation in Fort Worth - Free Measure, Exact Written Quote

Trusted Door Installation for Fort Worth Homeowners

A new door should close flush, seal tight, and swing smooth for twenty years. In Fort Worth, that means choosing a door that handles triple-digit summers, spring hail, and the occasional hard north wind without warping, sticking, or leaking around the frame. Lightwell Windows Fort Worth installs and replaces entry doors, storm doors, sliding glass doors, and French doors across Tarrant County, and every job starts with a written price before any work begins. Keith Yamada leads our Fort Worth team with the same approach since 2010: name the exact door, the exact labor, and the exact number before a single tool comes off the truck. Call (682) 900-6694 to talk through your door project with a real person, any hour.

Call (682) 900-6694

Key Takeaways

• Free written estimates for every door project in Fort Worth, with no invoice surprises at the end.
• Eight manufacturer brands on hand, including Therma-Tru, PGT, and CGI, so the recommendation fits your home.
• The 365-Day Done Right Promise covers every door we install. If it is not right, we make it right.
• Shoe covers, drop cloths, and a photo of the clean-up before the crew leaves, on every visit.
• Live phone answered 24/7 at (682) 900-6694 – a person, not a recording.

Front Door Replacement

Front door replacement in Fort Worth typically runs between $1,200 and $4,500 for the door, frame work, hardware, and installation, depending on whether you choose a steel, fiberglass, or wood door and how much trim and threshold work the opening needs. A front door is the first thing you touch when you leave and the first thing a guest sees, and here in Fort Worth it also has to stand up to afternoon sun that fades cheap finishes in a couple of seasons. Our team at Lightwell Windows Fort Worth pulls the old slab and frame, checks the rough opening for rot and square, sets the new pre-hung unit level, and insulates and seals the perimeter so the Texas heat stays outside. For homeowners across the metroplex, we also provide Fort Worth Door Installation.

Energy-Efficient Entry Doors

Fort Worth summers will find every gap in an old doorframe. A fiberglass door with a foam-insulated core cuts the heat gain at your entryway noticeably, and we pair it with new weatherstripping and an adjustable threshold so the seal holds year-round. We carry Therma-Tru fiberglass entry systems specifically because they handle direct sun without bowing the way hollow steel doors can on west-facing Fort Worth porches.

Door Slab vs. Full System Replacement

Sometimes the slab is the only thing worn out, and the frame is square and solid. Keith Yamada’s crew will tell you honestly when a slab swap makes more sense than a full tear-out, because our job is to find the fix that fits your budget and your home, not to sell the biggest ticket on the truck. Either way, the written quote lists exactly what is included before any work starts.

Door Replacement

Door replacement covers any door in the home that has failed or worn past repair – interior, exterior, bi-fold, or pocket – and in Fort Worth the cost usually falls between $500 and $3,500 depending on the door type, materials, and how much frame work the opening requires. You call for door replacement when a door no longer latches, the frame has settled out of square, or you can feel daylight and air moving around the edges. Lightwell Windows Fort Worth replaces the entire unit when needed, checks the jamb and hinges, and leaves you with a door that opens with one hand and closes without a slam.

Interior Door Replacement

Kids and pets are hard on interior doors. Hollow-core slabs crack, bi-fold tracks bend, and pocket doors jump their rails, and we replace those with solid-core or new hollow units that match the existing trim and hardware style. We match hinge placement to the old jamb so there is no patching and painting bill hiding behind the new door.

Replacing a Door That Has Settled

North Texas clay soil expands and contracts through the year, and it moves door frames with it. When a door binds at the top in summer and swings open on its own in winter, the frame usually needs resetting, not just the slab. We correct the rough opening, re-shim the jamb, and rehang the door so it behaves through every season.

Sliding Glass Door Replacement

Sliding glass door replacement in Fort Worth generally runs between $1,800 and $4,800 for a standard 6-foot or 8-foot opening, including the door, rollers, track work, and installation. Over time, sliding doors wear at the rollers, the track fills with dust and pet hair, and the door starts grinding instead of gliding. When the frame itself has warped in the Texas heat or the glass seal has failed and fogged, replacement is the honest fix, and our crew handles the full swap including new flashing and sealant at the exterior.

Signs Your Sliding Door Is Beyond Repair

Fog between the glass panes means the thermal seal is gone, and no roller replacement can fix that. A track that has worn through or a frame that flexes visibly when you push the door are also points where replacement saves you money over repeated repairs. We stock sliding door systems from ES Windows and ECO Window Systems, both built for high-traffic openings and long Fort Worth summers.

What Replacement Includes

We remove the old door and track, inspect the rough opening and subfloor for water damage, install the new unit level and square, and dress the exterior with matching trim and sealant. Drop cloths go down before the first cut, and our technicians wear shoe covers on your floors from the moment they walk in to the moment they leave.

Storm Door Installation

Storm door installation in Fort Worth typically costs between $600 and $1,500, including the door, hardware, closer, and labor. A storm door adds a layer of airflow control, lets you open the main door in spring and fall without inviting every bug in Tarrant County inside, and shields your entry door from full sun and rain. We install storm doors with adjustable closers so the door never slams on a child’s fingers or a dog’s tail.

Ventilation Without the Bugs

Fort Worth’s spring evenings are the best argument for a storm door. Full-view glass swaps for a screen panel, and the cross-breeze moves through the house without mosquitoes, flies, or the neighbor’s cat. We size the storm door to your existing entry, match the hinge side, and set the closer speed so the door eases shut instead of slamming.

Protecting Your Entry Door Investment

West-facing front doors in Fort Worth take direct afternoon sun, and a quality storm door blocks most of that UV load from ever reaching your primary door. That extends the life of the finish and the weatherstripping behind it. It is a small investment that protects a larger one, and the written quote includes every bracket and screw before we begin.

Sliding Glass Door Installation

Sliding glass door installation for a new opening or a remodel in Fort Worth runs between $2,200 and $5,500, depending on the opening size, whether framing is required, and the glass package you choose. A well-installed sliding door should roll with two fingers and seal tight enough to hold a candle steady next to the frame in a north wind. Our Fort Worth team installs new sliding doors in additions, sunrooms, and existing openings where the old door never fit quite right. We also bring that same careful approach to North Richland Hills Door Installation.

New Openings and Additions

Cutting a new opening for a sliding door means moving a header safely, and that is structural work you want done by a crew that checks the load path before cutting. We pull permits when the job calls for it, frame to code, and flash the opening so no rain finds its way under the threshold. Keith Yamada walks the site first and puts every step in writing.

Patio and Backyard Access

Most Fort Worth families want the back patio to feel connected to the living room and kitchen. A properly installed sliding door keeps the sightline open, locks securely, and slides without lifting or shoving. We install multi-point locking hardware on every sliding door we hang so the security matches the view.

Door Repair

Door repair in Fort Worth usually costs between $150 and $700, and our most common calls are doors that drag on the floor, strike plates that miss, hinges that pull loose, and weatherstripping that has flattened out. Not every door problem requires replacement. When the frame is sound and the door slab is intact, a repair puts things right for a fraction of the price, and a technician from Lightwell Windows Fort Worth can often fix the issue on the first visit.

Common Repairs We Handle

We re-mortise hinges, replace stripped screws with longer ones that bite the stud, realign strike plates, adjust thresholds, and replace worn weatherstripping. A door that rubs at the top corner is often just a hinge that has worked loose, and we would rather tighten three screws and call it done than sell you a door you do not need.

When a Repair Is Not Enough

If the frame is rotted at the bottom or split at the jamb, patching it buys you a year, not a decade. We tell you straight when repair money would be wasted and show you what a replacement costs instead. Either way, the price is in writing before the work starts, so you never pay a number that was not agreed to up front.

Exterior Door Installation

Exterior door installation in Fort Worth ranges from $900 to $4,200 depending on the door type, whether the frame is included, and the hardware package. Exterior doors are the boundary between your family and the weather, and in Fort Worth they get sun, wind, rain, and occasionally hail all in the same afternoon. Our crew installs pre-hung exterior doors with proper flashing at the sill and head, shims the jamb even, and tests the lock and deadbolt throw before we call the job done.

Weatherproofing and Flashing Done Right

The difference between a door that lasts twenty years and one that rots in eight is what happens behind the trim. We flash the rough opening, slope the sill pan, seal the perimeter, and caulk the exterior with products that stay flexible through Fort Worth’s temperature swings. No caulk smeared over a leak and called good.

Security Hardware

An exterior door is only as strong as its strike plate and deadbolt. We install reinforced strike plates with long screws that anchor into the wall framing, and we test the latch and bolt throw together so the door locks with one smooth motion. Every exterior door we hang gets a security check before the crew leaves.

French Door Installation

French door installation in Fort Worth generally costs between $2,000 and $5,500 for a standard pair, including the doors, hinges, hardware, threshold, and labor. French doors change how light moves through a room, opening a wall between living space and patio so the house feels larger while the doors stay shut. Our team at Lightwell Windows Fort Worth hangs French doors with equal reveals, matching gaps, and a threshold that seals without tripping little feet.

Interior French Doors

Between a dining room and a hallway, or a home office and the living room, interior French doors add privacy without closing off the light. We install them with glass options that diffuse sound while keeping the sightline, and the doors are adjusted so both leaves meet flush in the center without rubbing. Pet-safe finishes are standard where there is a choice.

Exterior French Doors

Exterior French doors need a weather-tight astragal at the center, and that joint is where cheap installs fail first. We install doors that carry a continuous seal down the center stile, add a head flashing that sheds rain, and adjust the astragal so it does not bind on the threshold or leave a daylight gap. A light well is what brings daylight deep into a building – that is exactly what a well-installed French door should do for your Fort Worth home.

Brands We Service

We install and service doors from PGT, CGI, Therma-Tru, and several other manufacturers, because no single brand is right for every home in Fort Worth. PGT builds impact-rated doors and windows that handle hail season without flinching, and we carry their sliding and French door lines for homeowners who want the option of impact glass without a custom order. CGI is our go-to for coastal-grade storm protection applied to North Texas weather – their doors are overbuilt in the best way, and our installers know their frame and fastening requirements down to the shim spacing.

Therma-Tru is the brand we recommend most often for entry doors, because their fiberglass slabs hold paint, resist warping, and carry a foam core that actually insulates the opening. For sliding doors and large glass panels, we also work regularly with ES Windows and ECO Window Systems, both known for clean lines and smooth roller hardware. Whether you have a Therma-Tru, a PGT, a CGI, or any other make already in your home, we can service it, and if replacement is the right call, we will show you comparable options across our brands so the recommendation fits the house rather than our inventory sheet.

Signs You Need a Pro Right Now

• Daylight visible around the door edges. If you can see light through the gap when the door is closed, weather, bugs, and outside air are moving through the same space. That gap costs you money on every cooling bill, and it usually means the weatherstripping is shot or the jamb has shifted.
• The door sticks, drags, or needs a shoulder to latch. A door that binds in summer or swings loose in winter is responding to the clay soil under your foundation. Forcing it makes the problem worse – the fix is a realignment of the jamb and hinges, not a bigger push.
• Water stains at the threshold or below the door frame. Staining, soft spots, or peeling paint at the bottom of an exterior door means water has been getting in for a while. Once rot starts in the subfloor or sill plate, the repair bill grows, so the time to act is at the first stain.
• A sliding door that grinds, jumps the track, or falls off the rail. Worn rollers and bent tracks are safety issues, especially with kids who lean on the glass while the door is half open. If the door has jumped the track once, it will do it again, and the glass itself can crack on the next hard hit.
• Fog or moisture between double-pane glass. When the thermal seal fails, the inert gas between the panes escapes and the door loses its insulating value. You cannot repair a failed seal, only replace the glass panel or the entire door, and the sooner the better for your energy bill.

If any of these show up at your home, call (682) 900-6694 and describe what you are seeing. We will tell you whether it is a repair or a replacement over the phone, free.

Our Process, Step by Step

We follow the same careful order on every door job in Fort Worth, because a door that is installed in a hurry will announce itself within a season. Here is what to expect when you call Lightwell Windows Fort Worth.

1. 1
   Phone consultation and free estimate. You reach a live person at (682) 900-6694, describe the door problem or project, and we schedule a visit. Keith Yamada or a senior technician comes out, measures the opening, checks the surrounding frame and floor, and discusses options that fit your budget.
2. 2
   Written price before any work starts. We put the door, materials, hardware, labor, and any permit fees in writing, item by item, before you approve anything. The number on that quote is the number you pay – no allowances, no change orders unless you change the scope.
3. 3
   Prep and protection. On install day, the crew lays drop cloths from the entry to the work area, puts on shoe covers, and moves only what you have approved. We ask before touching furniture, decor, or anything hanging near the door, and we keep tools quiet during nap times when families ask.
4. 4
   Installation and sealing. We remove the old door, correct the rough opening, set the new unit level and plumb, shim the jamb, and flash and seal the exterior. Every screw is placed deliberately, hinges are adjusted for a perfect reveal, and the threshold is set to seat the door without tripping bare feet.
5. 5
   Clean-up and final walkthrough. We vacuum the work area, wipe down surfaces, and take a photo of the clean-up before we leave. Then we walk the door with you, test the lock and the swing, and hand you the written warranty and the 365-Day Done Right Promise in writing, not as a verbal promise.

How Much Does Door Installation Cost in Fort Worth?

Our Service Area Near Fort Worth

Lightwell Windows Fort Worth installs doors across Tarrant County, including home neighborhoods from Wedgwood to the Cultural District, and out to North Richland Hills, Hurst, Southlake, Forest Hill, Everman, Kennedale, Pecan Acres, River Oaks, and Sansom Park. Most service calls within Fort Worth happen same week, and we schedule around school drop-offs, nap times, and work shifts where we can. If you are nearby in Door Installation in Burleson or Door Installation in Euless, we cover those communities too. For any door project in the area, this is the team to call at (682) 900-6694.

Frequently Asked Questions About Door Installation in Fort Worth

Schedule Your Door Installation Service in Fort Worth Today

Call Lightwell Windows Fort Worth at (682) 900-6694 to schedule a free, no-obligation estimate for any door project. You will get a written, itemized price before any work starts, a crew that respects your home as if it were their own, and the 365-Day Done Right Promise in writing. Keith Yamada and the team are ready when you are.

Written by Keith Yamada, Owner at Lightwell Windows Fort Worth, serving Fort Worth since 2010.